Little Bear 迷你 50/60Hz 频闪速度闪光灯+转速表盘，适用于转盘 LP 唱片

$36.99

Features

Generate the Corresponding 50/60HZ Frequency Flash Fource
Ultra-Low Voltage to Ensure Safety
3W High Brightness LED Output
Used with the Tachometer

Free Shipping

2-8 Days Arrival

30-Day Return

2-Year Warranty

Nobsound STB-02 铝制唱片重量夹，适用于黑胶唱片机转盘光盘稳定器

Nobsound STB-01 唱片配重/夹，适用于 LP 黑胶唱片机唱盘稳定器

Douk Audio ST-01 PRO HiFi 蓝牙 5.0 电子管放大器 USB DAC 同轴/光纤数字音频放大器带音量表

Nobsound R21K 唱机唱头校准唱臂唱片机配件调音套件

Can generate the corresponding 50/60HZ frequency flash source according to the frequency of household power supply 50/60HZ, almost suitable for being used in all countries in the world.
Used with the tachometer disc in the package to adjust the speed of your record player to the most accurate position and ensure the most accurate sound output.
The strobe light uses 15VAC power supply, and the ultra-low voltage is used to ensure that you are protected from electric shock during use, and it is safe and effective.
3W high brightness LED output, can be used in any environment. Whether day or night, indoor or outdoor. Small size, easy to use and convenient to collect.

Place the tachometer disc on the turntable of the record player and turn on your turntable.
Turn on the strobe light, align the light to the tachometer disc , try to put it closer and about 5-10 CM is appropriate.
Eyes staring at the corresponding 33.3/45 speed stripe on the tachometer disc.

If the stripes of the LED light must be stable and not moving, the rotation speed is correct;

If the stripes on the disc are moving slowly clockwise, the turntable is running fast;

If the stripes on the disc are moving slowly anticlockwise, the turntable is running slow.
If your turntable is adjustable, please adjust the rotation speed of the disc until the corresponding speed strip stops.
If your turntable is not adjustable, first try a new drive belt. Drive belts can stretch over time causing minor speed variations. Great speed variations are more likely to be mechanical issues.
After adjusting the speed, remove the tachometer disc and put your vinyl record on the record player to hear the most accurate music.

Strobe Light ×1
Tachometer Disc ×1
Power Supply ×1

User Manual & Driver of Little Bear Tachometer Disc

A cheap strobe light for accurate turntable speed! ——Reviewed by @ ANA[DIA]LOG

Works very well

It works really good mood very nice it’s all melted metal very easy to use

Great strobe tool for adjusting speed but needs power switch

Not much to say, works great, well built. Just needs a power switch. Kinda dumb that it doesn't to be honest. Even if it were just an inline one on the cord.

Usefull!

It works Fine!

Just what I needed!

Other than the documentation (hard to read), this is an ideal strove setup. Since I have both a quartz locked direct drive unit and a belt-drive unit, I was able to test the strobe out on the unit I know is accurate before using it to calibrate the belt-drive unit. It was dead-on, and made it easy to adjust with the 33 1/3 and 45 RPM on my belt drive. Nice build quality, too!

Excellent quality and all you need to check turntable speed

For the cost the Nobsound D60 stroboscope is very well-made, it far surpassed my expectations. The disc has no gaps (mentioned earlier by another reviewer) and is printed correctly, made out of metal heavy enough to properly sit still on the platter, making it very easy to see the appropriate dots moving left or right or being steady when speed has been set correctly. I had already set my speed using a cartridge alignment tool and chronometer and this confirmed my settings. Unless your turntable has the ability to set 33 1/3 and 45 rpm with separate pots (mine does not) or electronically, only set 33 1/3 (or re-calibrate every time you change speeds but that may result in premature wear of the speed adjustment pot and drift)

1 2 3